mounting KBPC5010 kbpc50005 50 1000 silicon bridge rectifiers :metal case : plated 0.25 ? (6.35mm)lug. : polarity symbols marked on case :thru hole for #8 screw,20in.-lbs. torque max. :1.02 ounce, 29 grams features mechanical data notes: 1.unit mounted on 9 ? x 3.5 ? x4.6 ? thick(23cmx9cmx11.8cmcm)al.plate. 2.bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #8 screw. the plastic package carries underwriters laboratory flammability classification 94v-0 ideal for printed circuit boards low reverse leakage high forward surge current capability high temperature soldering guaranteed: 260 c/10 seconds,at 5 lbs. (2.3kg) tension ratings at 25 c ambient temperature unless otherwise specified. single phase half-wave 60hz,resistive or inductive load,for current capacitive load current derate by 20%. 400.0 664 10 1.0 2500 2.0 -65 to +150 -65 to +150 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 50 kbpc 50005 kbpc 5001 kbpc 5002 kbpc 5006 kbpc 5008 kbpc 5010 kbpc 5004 volts volts volts symbols units amps amps volts v rrm v rms v dc i (av) i fsm maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward output rectified current at t c =50 c (note 1,2) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) rating for fusing(t<8.3ms) maximum instantaneous forward voltage dorp per bridge element at 17.5a maximum dc reverse current t a =25 c at rated dc blocking voltage t a =100 c isolation voltage from case to leads typical thermal resistance (note 2) operating junction temperature range storage temperature range a m c i t v iso r q ja t j t stg c/w ma i r c v ac a s 2 2 v f 1.1 kbpc25 dimensions in inches and (millimeters) .452 (11.5) max. 0.480(12.2) 0.425(10.8) 1.181(30.0) 1.102(28.0) 0.673(17.1) 0.633(16.1) hole for no.8 screw 0.033x0.250 (0.8x6.4) 1.181(30.0) 1.102(28.0) 0.673(17.1) 0.633(16.1) 0.582(14.8) 0.543(13.8) 0.732(18.6) 0.692(17.6) ac ac - + 0 50 thru v o l t a g e r a n g e t o v o lts current . a mp ere weight polarity terminals case maximum ratings and electrical characteristics email: info@olitech-elec.com website: www.olitech-elec.com page 1 - 2 olitech electronics co. ltd.
35 28 21 14 7 0 0 25 50 75 100 125 150 175 400 320 240 160 80 0 0.6 0.8 1.0 1.2 1.4 1.5 0.1 1.0 10 100 0.01 0.1 1 10 100 10 1 0.1 0.01 reverse voltage,volts t,pulse duration,sec. fig. 5-typical junction capacitance fig. 6-typical transient thermal impedance fig. 3-typical instantaneous forward characteristics number of cycles at 60 hz fig. 2-maximum non-repetitive peak forward surge current fig. 1- forward current derating curve average forward rectified current, amperes instantaneous forward current,amperes junction capacitance, pf peak forward surge current, amperes instantaneous forward voltage, volts single phase half wave 60hz resistive or inductive load 1 10 100 0.1 1 10 200 100 t j =25 c pulse width=300 m s 1%duty cycle t j =25 c 10 100 1000 2000 0 20 40 60 80 100 1,000 100 10 1 0.1 0.01 tj=100 c tj=25 c percent of peak reverse voltage,% fig. 4-typical reverse characteristics instantaneous reverse current, microamperes transient thermal impedance, c/w ambient temperature, c 8.3ms single half sine-wave (jedec method) 50 1000 silicon bridge rectifiers 0 50 v o l t a g e r a n g e t o v o lts current . a mp ere email: info@olitech-elec.com website: www.olitech-elec.com page 2 - 2 olitech electronics co. ltd. KBPC5010 kbpc50005 thru
|
